DigitalMad 2004-11-06 04:07
I am trying to setup custom profiles for my Toshiba M200 Tablet PC. The res of the built in LCD is best viewed at 1400x1050 and my external monitor at 1280x1024. I would like to use three different profiles.
1. Laptop mode, no external monitor. The internal LCD is set to 1400x1050.
2. Docked mode, dual display. The internal LCD is set to 1400x1050 and the external LCD is set to 1280x1024.
3. Docked mode, cloned display. The internal monitor is set to 1280x1024 and the external LCD is set to 1280x1024.
The UltraMon profiles will automatically switch the resolution to lower settings but it will not change the internal LCD back to 1400x1050 using a profile. I have to change it manually.
Any suggestions? Here are the details from the UltraMon 2.5(2.5.22.0) about window:
2 monitors
Current desktop: 2680x1050 (-1280,0 - 1400,1050)
Monitor 1 - Plug and Play Monitor (primary):
Settings: 1400x1050, 32-bit color, 60 Hz refresh rate
Coordinates: 0,0 - 1400,1050. Workspace: 0,0 - 1400,1020
Video card: NVIDIA GeForce FX Go5200 32M/64M
Device: \\.\DISPLAY1\Monitor1
Monitor 2 - L675 (removable):
Settings: 1280x1024, 32-bit color, 60 Hz refresh rate
Coordinates: -1280,0 - 0,1024. Workspace: -1280,0 - 0,994
Video card: NVIDIA GeForce FX Go5200 32M/64M
Device: \\.\DISPLAY2\Monitor0
Thanks!!!
|
