|
Post Reply
Neil 2007-09-20 19:11
Love the software, but with my monitors configured Primary or Secondary, when my plasma is switched off or over to a different source, windows is switched over to display on th 7" LCD screen in my media centre and doesn't return to the plasma when its turned on again. I have to reconfigure them.
Is there a way of preventing this or stopping the program disabling the plasma when it is turned off?
Any help greatly apreciated!
Zalman HD160XT (7" LCD Screen)
NEC Plasma
Windows XP Mediacentre
Brgds,
Neil
|
Christian Studer 2007-09-21 11:03
I'm not sure what would cause this, maybe it's the video card driver, but it's unlikely that this would be related to UltraMon.
To verify this, check if you still have the problem without UltraMon running or installed. To close UltraMon, right-click the UltraMon icon in the system tray and select Close from the menu.
As a workaround, you could use the Save/RestoreWndPos scripts to save and restore window positions.
Christian Studer - www.realtimesoft.com
|
Neil 2007-09-21 17:05
Thanks Christian. Your right, it still does it without Ultramon installed. I suspect its because the MSI 7600GT Diamond Plus sends the display signal via its HDMI output to my Pioneer VSX-AX4AVI and that in turn via HDMI to my NEC Plasma. When I turn the plasma on again, it tries to handshake with the pioneer again but reports No Signal. Probably because the small display now has windows and the mouse pointer etc.
I tried saving a Display Profile in Ultramon the way it was and reloading that and it kinda worked (my Zini software got confused as to which monitor it was suposed to be on).
Do you suggest I still try the script method?
Thanks for your help.
Brgds,
Neil
|
Christian Studer 2007-09-22 07:52
The scripts should work fine, but please note that this only works if the applications are still running when you re-enable the monitor.
Christian Studer - www.realtimesoft.com
|
Post Reply
|
